Building deck railing – To building wooden deck railing, staring with measure the distance between the existing deck posts. Stretch your tape measure along the boards. Brand measurement with a pencil. Measure and mark two more plates. Place a table on chop saw. Keeping the board against the backstop on the saw. Space measurement label under the blade. Cutting through the board with the saw. Cutting wood boards to length.
Third steps to building deck railing from wooden is, place one table between the posts 1 inch above the deck board. Keep exterior to the board flush with the outer face of the posts. Turn the board so the side narrow faces. Lay the level on the table to make sure that it provides a flat surface. Press the board in place with a rubber mallet. Driving a screw diagonally through each end of the board and into the post. Connect other board 36 inches above the surface of the deck boards. Hold the board vertically and flush with the outer edge of the posts.
Keep a picked up boards. Make the top and bottom of the picket is flush with the upper and lower edges of the boards. Running a screw through the upper and lower side of the picket to attach it to both boards. Attach a picket every 3 inches along the boards. Lay the last board over the railing over the edge of the top board and the top of the pickets. Running a screw through the board and the top buckle board every 18 inches along the rail. And the steps of building deck railing from wooden are finished.building deck railing